Diagnostics

test-point reference

Dedicated test points provide access to major display signals for troubleshooting with appropriate test equipment.

Service safety: Diagnostic work on an energized pinball machine should only be performed by someone familiar with the machine's electrical system and the hazards present in the backbox.

Power and control signals

+5V
GND / 0V
BCD1
BCD2
BCD3
BCD4
LD (Load)
BL (Blanking)

Segment outputs

Segment A
Segment B
Segment C
Segment D
Segment E
Segment F
Segment G

Digit-enable outputs

Digit 1
Digit 2
Digit 3
Digit 4
Digit 5
Digit 6

Segment and digit-enable test points are accessible directly on the LED PCB. The ground test point is positioned near the PCB edge for convenient connection of a meter, logic probe, or oscilloscope ground clip.

This page intentionally identifies test-point functions without prescribing energized measurement procedures. Use appropriate test equipment and observe normal electrical safety practices.