6-Digit LED Replacement Display

Bally / Stern 6-Digit LED Replacement Display

Pre-assembled and function-tested. No soldering is required for normal installation in a compatible machine using the original display harness.

Placeholder for display front view

Modern replacement for aging plasma display assemblies.

The Logic Level Electronics display is designed to replace original Bally AS-2518-21 / AS-2518-15 and compatible Stern six-digit display assemblies when the machine's existing display part number, connector configuration, and wiring match the supported application.

The display operates from the machine's low-voltage display supply and does not use the original plasma-display high-voltage connection.

Each display is individually assembled, visually inspected, and function-tested prior to shipment.

Features

design features

Changes focus on installation compatibility, serviceability, diagnostics, mechanical robustness, and removing the unnecessary high-voltage contact from the replacement display.

Factory-style connector orientation

Uses the same physical machine-harness connector orientation as the original compatible display assemblies, allowing the existing factory harness to connect in its original orientation.

Updated digit-enable circuit

The display uses a DMOS driver in the digit-enable circuitry. This is an internal design change; the intended machine-side connector pinout and MPU display-signal interface remain compatible with the original supported application.

Surface-mount logic

Primary logic components are soldered directly to the PCB rather than installed in removable IC sockets, eliminating additional socket-to-IC contact points.

Expanded diagnostic test points

Dedicated access is provided for +5V, ground, BCD inputs, load, blanking, segments A–G, and individual digit-enable outputs.

High-voltage connection physically omitted

The original plasma-display high-voltage connection is not used. The corresponding connector position is intentionally omitted from the PCB.

Flexible TPU light shroud

A custom black flexible TPU shroud surrounds the display area and is designed to sit against the backglass to help reduce backbox illumination entering the LED display window.

Enlarged connector solder pads

The main harness connector uses enlarged PCB solder pads to increase soldering and mechanical support area at the connector.

Uses the existing factory harness

No separate display power supply is required in a verified compatible, factory-configured machine.

Direct replacement reference

Supported original display references

BallyAS-2518-21, AS-2518-15
SternA-434, DA-100, A-472
Display format6-digit
AssemblyPre-assembled
TestingFunction-tested prior to shipment
Not a 7-digit replacement: This product is for supported six-digit display positions only. Some later machines use a mixture of six-digit and seven-digit displays.
Assembly compatibility

Driver and LED PCBs are designed as a matched assembly.

The display is supplied as a complete assembly.

Matched assembly

The driver PCB and LED PCB are designed to operate together and should not be interchanged with subassemblies from other Logic Level Electronics display versions.

Mixed displays

Complete Logic Level Electronics displays may be used alongside other compatible original or aftermarket displays. Brightness, color, viewing characteristics, and appearance may vary between display types.

Uniform appearance

Matching display types are recommended when the most consistent backbox appearance is desired.

Game compatibility reference

Verify the hardware in your individual machine before ordering.

These machines are decades old and may have been repaired, rewired, or fitted with replacement hardware during their service life.

7 six-digit displays

Bally: Six Million Dollar Man

5 six-digit displays — full 6-digit backbox replacement

Bally: Black Jack, Dolly Parton, Eight Ball, Embryon, Evel Knievel, Freedom, Future Spa, Gold Ball, Harlem Globetrotters, Hotdoggin', KISS, Lost World, Mata Hari, Mystic, Night Rider, Nitro Groundshaker, Paragon, Playboy, Power Play, Rolling Stones, Silverball Mania, Space Invaders, Star Trek, Strikes & Spares, Supersonic, Viking, Voltan

Stern: Ali, Cosmic Princess, Dracula, Galaxy, Hot Hand, Lazer Lord, Lectronamo, Magic, Memory Lane, Meteor, Nugent, Pinball, Stars, Stingray, Trident, Wild Fyre

4 six-digit displays

Bally: Grand Slam

2 six-digit displays

Bally: Elektra, Medusa, Mr. & Mrs. Pac-Man, Vector

Stern: Lightning

Published references differ regarding the number/configuration of six-digit display assemblies used in Elektra. Verify the display hardware installed in the individual machine before ordering multiple units.

1 six-digit display

Bally: Beat the Clock, Black Pyramid, BMX, Centaur, Centaur II, Cybernaut, Eight Ball Champ, Eight Ball Deluxe, Fathom, Fireball Classic, Fireball II, Flash Gordon, Frontier, Kings of Steel, Lady Luck, Rapid Fire, Skateball, Speakeasy, Spectrum, Spy Hunter, X's & O's, Xenon

Stern: Big Game, Catacomb, Cheetah, Dragonfist, Flight 2000, Freefall, Iron Maiden, Nine Ball, Orbitor 1, Quicksilver, Seawitch, Split Second, Star Gazer, Viper

Installation & electrical safety

Turn the machine off and unplug it before servicing any display.

Important: The display does not use the original plasma-display high-voltage connection. Installing this display does not disable or remove high voltage elsewhere in the pinball machine. Other original displays and associated power-supply circuitry may still use hazardous high voltage.
  • Verify display and connector compatibility.
  • Confirm the harness connector is correctly aligned and fully seated; do not force or modify factory keying.
  • Inspect machine wiring and connector for obvious damage or previous modification.
  • Correct known wiring, power-supply, MPU, or display-drive faults before installation.

Damage resulting from improper installation, incompatible or modified machine wiring, incorrect machine voltages, pre-existing machine faults, or modification of the display after delivery is outside the intended use of the product.

Read Installation Instructions